Category: Transient Plane Source
Author(s): Chang-Jian Weng, Chung-Feng Dai, Jui-Ming Yeh, Pei-Ru Li
Keywords: dielectric permittivity, differential scanning calorimeter, differential scanning calorimeter (dsc), dma, dsc, dynamic mechanical analyzer, dynamic mechanical analyzer (dma), epoxy, fourier transform infrared spectroscopy (ftir), fourier-transform infrared spectroscopy, ftir, mercury porosimetry, polymers, scanning electron microscopy, scanning electron microscopy (sem), sem
Abstract: Porous epoxy thermosets were prepared using poly(ethylene glycol) (PEG) as a template. The two epoxies that were used to make the porous thermosets were diglycidylether bisphenol-A (DGEBA), and triphenylolmethane triglycidyl ether (TGTPM). Trimethylolpropane tris(poly(propylene glycol)), amine terminated)ether (T-403) was used as a hardener in producing the thermosets. The porous thermosets were then characterized to determine their structural, thermal, optical, dielectric, and mechanical properties, and the results of these tests were compared to those for the bulk epoxy samples.
Reference: Polymer Degradation and Stability 95 (2010) 600-609
DOI: 10.1016/j.polymdegradstab.2009.12.008