Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Composites made from a combination of cis-polyisoprene (CPI) and nitrile butadiene rubber (NBR) were investigated to determine the effect of varying proportions of each additive on the mechanical and thermal properties of the final product. The use of a scanning electron microscope to quantify the structure of the material revealed that all samples were homogenous. Young's modulus and tensile strength were two of the mechanical properties studied. The blend composition ...
Porous epoxy thermosets were prepared using poly(ethylene glycol) (PEG) as a template. The two epoxies that were used to make the porous thermosets were diglycidylether bisphenol-A (DGEBA), and triphenylolmethane triglycidyl ether (TGTPM). Trimethylolpropane tris(poly(propylene glycol)), amine terminated)ether (T-403) was used as a hardener in producing the thermosets. The porous thermosets were then characterized to determine their structural, thermal, optical, dielectric, and mechanical properties, and the results ...
The thermal and mechanical properties of PS/PMMA immiscible polymer blends were investigated. The effects of the dispersion of CdS nanoparticles on these properties were also investigated. The dispersion of the nanoparticles was found to result in an increase in glass transition temperature, as well as the thermal conductivity. The PS matrix was found to become more brittle and the PMMA matrix was found to become more compact upon the ...
The mechanical and thermal properties of blends of cis-polyisoprene (CPI) and trans-polyisoprene (TPI) are investigated and compared to those of the pure elastomers. It was found that the elastic modulus and tensile strength increased with increasing TPI content and that the thermal conductivity, thermal diffusivity, and specific heat of the blends also increased with increasing TPI content. In contrast to this trend, the measured thermal properties of pure TPI were ...
