Epoxy nanocomposites containing thermally reduced graphene oxides (TRGs) with different oxygen contents were prepared and their mechanical and thermal properties were investigated. It was found that increasing the number of oxygen containing groups on the TRGs resulted in reduced agglomeration of the graphene oxides within the epoxy matrix. Therefore, in samples with a higher oxygen content, a higher interfacial contact area is present between the organic and inorganic phases in ...
Polytetramethylene ether glycol (PTMEG) was used to functionalize multi-walled carbon nanotube (MWNT) by grafting to produce MWNT-g-PTMEG. These functionalized nanotubes were then dispersed in thermoplastic polyurethane (TPU) to form a TPU/MWNT nanocomposite. It was found that the functionalization resulted in improved dispersion of the nanotubes in the TPU material. The tensile strength and elongation at break of the nanocomposite were also enhanced by the addition of the nanotubes in ...
Porous epoxy thermosets were prepared using poly(ethylene glycol) (PEG) as a template. The two epoxies that were used to make the porous thermosets were diglycidylether bisphenol-A (DGEBA), and triphenylolmethane triglycidyl ether (TGTPM). Trimethylolpropane tris(poly(propylene glycol)), amine terminated)ether (T-403) was used as a hardener in producing the thermosets. The porous thermosets were then characterized to determine their structural, thermal, optical, dielectric, and mechanical properties, and the results ...
The thermal and mechanical properties of PS/PMMA immiscible polymer blends were investigated. The effects of the dispersion of CdS nanoparticles on these properties were also investigated. The dispersion of the nanoparticles was found to result in an increase in glass transition temperature, as well as the thermal conductivity. The PS matrix was found to become more brittle and the PMMA matrix was found to become more compact upon the ...
The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....
