Porous epoxy thermosets were prepared using poly(ethylene glycol) (PEG) as a template. The two epoxies that were used to make the porous thermosets were diglycidylether bisphenol-A (DGEBA), and triphenylolmethane triglycidyl ether (TGTPM). Trimethylolpropane tris(poly(propylene glycol)), amine terminated)ether (T-403) was used as a hardener in producing the thermosets. The porous thermosets were then characterized to determine their structural, thermal, optical, dielectric, and mechanical properties, and the results ...
Si-SiC composite foams were prepared using tannin-based foams as templates. The foams were prepared by four different methods for the determination of which method would best produce a foam with a pore size under 200 µm. The foam samples were characterized by SEM, XRD, and Raman spectroscopy, and the thermal conductivity of one of the foams was investigated by the transient plane source method. It was found that direct infiltration of ...
Yttria-stabilized zirconia (YSZ) powders containing varying amounts of SiO2 and Al2O3 impurities were plasma sprayed onto metallic substrates and subsequently investigated. The authors were interested in how the impurities affected sintering rates, thermal conductivity, linear contraction, and pore size and architecture among other things. The YSZ coatings were heat treated at 1400°C for 10 hours and then analyzed for the properties mentioned above. A machine was used to measure the ...
