Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Jui-Ming Yeh

Total Papers Found: 7

Physical study of room-temperature-cured epoxy/thermally reduced graphene oxides with various contents of oxygen-containing groups

Epoxy nanocomposites containing thermally reduced graphene oxides (TRGs) with different oxygen contents were prepared and their mechanical and thermal properties were investigated. It was found that increasing the number of oxygen containing groups on the TRGs resulted in reduced agglomeration of the graphene oxides within the epoxy matrix. Therefore, in samples with a higher oxygen content, a higher interfacial contact area is present between the organic and inorganic phases in ...

Author(s): , , , , , , ,

Influences of template concentration and epoxy functionality on porous epoxy systems: Characteristics of thermal stability, optical, dielectric, and mechanical properties

Porous epoxy thermosets were prepared using poly(ethylene glycol) (PEG) as a template. The two epoxies that were used to make the porous thermosets were diglycidylether bisphenol-A (DGEBA), and triphenylolmethane triglycidyl ether (TGTPM). Trimethylolpropane tris(poly(propylene glycol)), amine terminated)ether (T-403) was used as a hardener in producing the thermosets. The porous thermosets were then characterized to determine their structural, thermal, optical, dielectric, and mechanical properties, and the results ...

Author(s): , , ,

Enhancement of physical properties of electroactive polyimide nanocomposites by addition of graphene nanosheets

The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....

Author(s): , , , , , , , ,

Systematically comparative studies on the preparation and physical properties of PMMA–silica mesocomposite and nanocomposite membranes

PMMA/silica mesocomposites (PSM) and nanocomposites (PSN) were synthesized by incorporating vinyl-modified mesoporous silica (VMS) or silica particles into the poly (methyl methacrylate). The prepared composites were characterized by TEM and GPC. Thermal conductivity and gas permeability measurements were performed on the composites using a thermal constants analyzer and Yanco GTR-31 gas permeability analyzer, respectively. It was determined that an increase in the content of nanoscale silica particles improved the ...

Author(s): , , , , ,

Effect of vinyl-modified silica and raw silica particles on the properties of as-prepared polymer-silica nanocomposite foams

This research studied the effect of the addition of vinyl-modified silica and raw silica additions to polymer-silica nanocomposite foams. Extensive physical property characterization was undertaken after their addition to quantify their influence. TEM found that silica particles added through the vinyl-modified silica dispersed better than the raw silica. This created foams with a higher density and smaller cell size. A slight reduction in the thermal conductivity after the additions was ...

Author(s): , , , , , ,