In this study, various filler loadings of thin graphite sheets were added to epoxy adhesives to improve thermal conductivity. Natural graphite powder and graphite nanoflakes were used as reference fillers in the same resin, and the thermal conductivity of each filler was measured with a TPS thermal constants analyzer based on the transient plane source (TPS) method. Results showed that the graphene sheets enhanced the thermal conductivity by more than 22 ...
The purpose of this study was to fabricate and analyze the physical properties of polyacrylate–gold nanocomposites (PGNs) with gold nanoparticles (GNPs) as their nucleation agents. The transient plane source (TPS) method was used to measure the thermal properties of the polyacrylate–gold nanocomposite foams (FPGNs) and PGNs. Results showed that the addition of GNPs improved thermal conductivity of the PGN materials, but as the size of GNPs increased, the ...
As nanotechnology becomes increasingly important, researchers are investigating methods to decrease the size of electronics. Carbon nanotubes (CNTs) have potential applications in nanoelectronics because of their high thermal conductivity and miniscule size. This study had many focuses, but a TPS used the transient plane source method to specifically measure the thermal conductivities of CNT-fabricated thermal pastes. Results showed that the thermal conductivities varied depending on filler content, but were comparable ...
Silicone materials have high electrical and thermal insulation properties that are useful for engineering applications. In this study, vapour grown carbon nanofibers (VGCNF) were produced by two different methods and were added to silicone rubber to improve conductivity. A thermal constant analyser measured the thermal conductivities of the silicone and its composites using the transient plane source (TPS) method. Results showed that thermal conductivities of the roll-mill produced VGCNF/silicone ...
This study used macroscopic equations to determine fluid dynamics and heat transport properties in metallic slip-reaction (SR)-foams for their application in gas turbines. The numerical results were validated by an experimental method that analyzed the physical and mechanical properties of the SR-foams. An apparatus measured the effective thermal conductivity of the foam samples using the transient plane source (TPS) method. Results showed that the foams had low thermal conductivities ...