Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Kung-Chin Chang

Total Papers Found: 5

Physical study of room-temperature-cured epoxy/thermally reduced graphene oxides with various contents of oxygen-containing groups

Epoxy nanocomposites containing thermally reduced graphene oxides (TRGs) with different oxygen contents were prepared and their mechanical and thermal properties were investigated. It was found that increasing the number of oxygen containing groups on the TRGs resulted in reduced agglomeration of the graphene oxides within the epoxy matrix. Therefore, in samples with a higher oxygen content, a higher interfacial contact area is present between the organic and inorganic phases in ...

Author(s): , , , , , , ,

Enhancement of physical properties of electroactive polyimide nanocomposites by addition of graphene nanosheets

The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....

Author(s): , , , , , , , ,

Effect of vinyl-modified silica and raw silica particles on the properties of as-prepared polymer-silica nanocomposite foams

This research studied the effect of the addition of vinyl-modified silica and raw silica additions to polymer-silica nanocomposite foams. Extensive physical property characterization was undertaken after their addition to quantify their influence. TEM found that silica particles added through the vinyl-modified silica dispersed better than the raw silica. This created foams with a higher density and smaller cell size. A slight reduction in the thermal conductivity after the additions was ...

Author(s): , , , , , ,

Preparation and thermal properties of UV-curable polyacrylate-gold nanocomposite foams 

The purpose of this study was to fabricate and analyze the physical properties of polyacrylate–gold nanocomposites (PGNs) with gold nanoparticles (GNPs) as their nucleation agents. The transient plane source (TPS) method was used to measure the thermal properties of the polyacrylate–gold nanocomposite foams (FPGNs) and PGNs. Results showed that the addition of GNPs improved thermal conductivity of the PGN materials, but as the size of GNPs increased, the ...

Author(s): , , , , , ,

Effect of dispersion capability of organoclay on cellular structure and physical properties of PMMA/clay nanocomposite foams

The authors prepared PMMA/clay composites by the in situ bulk polymerization method. The prepared composites were characterized by FT-IR, WAXRD, SEM, TEM, DMA and the transient plane source (TPS) technique to measure thermal conductivity. Not only were the thermal properties of the composites studied, but physical and chemical properties as well....

Author(s): , , , , , , ,