The effects of using different fillers and the effects of filler content and particle size on the thermal properties of thermal interface materials were investigated. The most prominent enhancement in thermal conductivity was observed for samples containing carbon nanotubes and graphite. The filler particle size was also found to significantly affect the thermal conductivity, as smaller fillers resulted in a higher thermal conductivity. The article also describes two sample holders ...
Carbon nanotubes (CNTs) have extremely high thermal conductivity and can raise the thermal conductivity of a polymer matrix when used as an additive. Previous research has shown that random CNT orientation in polymer matrices gives a much lower thermal conductivity value than a specific alignment direction. This project tested the thermal conductivity of oils and polymers. Results were encouraging, with the thermal conductivity of the composites increasing linearly with the ...
As nanotechnology becomes increasingly important, researchers are investigating methods to decrease the size of electronics. Carbon nanotubes (CNTs) have potential applications in nanoelectronics because of their high thermal conductivity and miniscule size. This study had many focuses, but a TPS used the transient plane source method to specifically measure the thermal conductivities of CNT-fabricated thermal pastes. Results showed that the thermal conductivities varied depending on filler content, but were comparable ...
