The purpose of this study was to fabricate and analyze the physical properties of polyacrylate–gold nanocomposites (PGNs) with gold nanoparticles (GNPs) as their nucleation agents. The transient plane source (TPS) method was used to measure the thermal properties of the polyacrylate–gold nanocomposite foams (FPGNs) and PGNs. Results showed that the addition of GNPs improved thermal conductivity of the PGN materials, but as the size of GNPs increased, the ...
Diamond is an extremely conductive material that would be ideal for dissipating heat in microelectronics if it were not for its high price tag. In this study, cost effective copper- and chromium-diamond composites (uncoated (Cu/D), Cu-coated (Cu/CuD), and Cr-coated (Cu/CrD)) were produced to determine their potential use in heat sink applications. A Thermal Constant Analyzer measured the thermal conductivity of the matrix and composite samples using the ...
As nanotechnology becomes increasingly important, researchers are investigating methods to decrease the size of electronics. Carbon nanotubes (CNTs) have potential applications in nanoelectronics because of their high thermal conductivity and miniscule size. This study had many focuses, but a TPS used the transient plane source method to specifically measure the thermal conductivities of CNT-fabricated thermal pastes. Results showed that the thermal conductivities varied depending on filler content, but were comparable ...
Silicone materials have high electrical and thermal insulation properties that are useful for engineering applications. In this study, vapour grown carbon nanofibers (VGCNF) were produced by two different methods and were added to silicone rubber to improve conductivity. A thermal constant analyser measured the thermal conductivities of the silicone and its composites using the transient plane source (TPS) method. Results showed that thermal conductivities of the roll-mill produced VGCNF/silicone ...
Aerogels are ultra-light, insulative, porous materials that have a wide variety of applications. The aim of this study was to synthesize resorcinol/formaldehyde (RF) cross-linked silica aerogels in one pot by acid catalysis. A thermal constant analyzer measured the thermal conductivity of the RF/SiO2 aerogels using the transient plane source (TPS) method. Results showed that although the RF/SiO2 aerogels had a lower density, their thermal conductivities resembled those ...
