The purpose of this study was to measure the thermal properties of ammonia borane and polyiminoborane with the transient plane source (TPS) method to analyze their applicability to heat storage systems. Tests results showed that the thermal diffusivity and thermal conductivity of ammonia borane increased as porosity of the samples decreased. Alternatively, both thermal properties of polyiminoborane increased with porosity, and thermal conductivity values were significantly lower than those obtained ...
Thermal conductivity is one of the most important properties of fuel and cladding material. In this study, the thermal conductivity of uranium and T91 steel were measured using the transient plane source (TPS) method. Results showed that the thermal conductivity of T91 increased gradually to a point, then decreased. Fast reacting cladding materials require high thermal conductivities, and T91 was found to have higher conductivities than other commercial materials. As ...
The production of closed cell foams has recently advanced as the materials gain interest. The purpose of this study was to use the transient plane source (TPS) method to measure the thermal conductivity of AlSi7 closed cell foams. Results showed that thermal conductivity increased with sample density, and experimental results were higher than the predictions of the theoretical models. Measurements were also carried out on different directions of the samples ...
Proton exchange membranes (PEM) are important components of proton exchange membrane fuel cells (PEMFC) which could potentially substitute fossil energy. The purpose of this study was to theoretically and experimentally study how the thermal conductivity of the PEM, Nafion 117, is related to water content and temperature. A thermal analyzer measured the thermal conductivity of dry Nafion 117 using the transient plane source (TPS) method. Results showed that, as predicted, the thermal ...
Graphite papers can enhance mechanical properties while lowering electrical properties, however, to generate conducting membranes, the chemical and thermal characteristics of the papers require further reduction. In this study, mercaptobenzene (MB) functionalized graphite and epoxy-based hybrid membranes were prepared and analyzed. A thermal analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results showed that the powder-pressed pellets made of graphite-MB-gold nanoparticles (AuNPs) had ...
