Seasonal thermal storage based on phase change materials (PCMs) require a thermally conductive host because they typically have low thermal conductivities. In this study, tannin-based composite carbon foams were prepared using thermally conductive exfoliated graphite (EG) fillers and pMDI additives. A thermal analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results showed that the EG-carbon foams and the EG/pDMI-carbon foams showed significantly ...
The transient plane source (TPS) method is a popular technique that is used to measure the thermal properties of solids. The TPS method is widely used because it can test a variety of materials, it is easy to set up, and measurements are non-invasive. A downside of the TPS method is that it requires two homogenous samples, unlike invasive contact-probe techniques. This study proposes the idea of a “stamp sensor”, ...
Aerogels have a wide range of properties that make them effective thermal insulators. However, these properties are lost when the materials absorb too much water. The goal of this experiment was to determine how temperature and humidity affect the insulative properties of silica nano-porous aerogels. A thermal constants analyzer measured the thermal conductivity of moist silica nano-porous materials using the transient plane source (TPS) method. Results showed that the thermal ...
Synthetic polymers in starch-based polymer formulations improve the thermal and mechanical properties of the compounds. The purpose of this study was to develop and analyze foams containing ethylene-vinyl acetate (EVA) and varying concentrations of corn starch. A Thermal Constants Analyser measured the thermal conductivity of the EVA/starch samples using the transient plane source (TPS) method. Results showed that the thermal conductivity of the blends increased with starch content. The ...
Li-ion battery electrodes are typically mixed with carbon black materials which have low thermal conductivity in high-power-density battery applications. In this study, multi-walled carbon nanotubes (MWCNTs) were added to Li-ion battery electrodes to improve thermal conductivity. A measured the thermal conductivity of the electrode samples at room temperature using the transient plane source (TPS) method. Results showed that the addition of MWCNTs enhanced the thermal conductivity of the electrodes by ...
