Diamond is an extremely conductive material that would be ideal for dissipating heat in microelectronics if it were not for its high price tag. In this study, cost effective copper- and chromium-diamond composites (uncoated (Cu/D), Cu-coated (Cu/CuD), and Cr-coated (Cu/CrD)) were produced to determine their potential use in heat sink applications. A Thermal Constant Analyzer measured the thermal conductivity of the matrix and composite samples using the ...
Aerogels are ultra-light, insulative, porous materials that have a wide variety of applications. The aim of this study was to synthesize resorcinol/formaldehyde (RF) cross-linked silica aerogels in one pot by acid catalysis. A thermal constant analyzer measured the thermal conductivity of the RF/SiO2 aerogels using the transient plane source (TPS) method. Results showed that although the RF/SiO2 aerogels had a lower density, their thermal conductivities resembled those ...
This study used macroscopic equations to determine fluid dynamics and heat transport properties in metallic slip-reaction (SR)-foams for their application in gas turbines. The numerical results were validated by an experimental method that analyzed the physical and mechanical properties of the SR-foams. An apparatus measured the effective thermal conductivity of the foam samples using the transient plane source (TPS) method. Results showed that the foams had low thermal conductivities ...
Aerogels are nano-porous materials with impressive thermal insulation properties. This study uses a new theoretical model to predict the effective thermal conductivity of aerogels based on gas and solid conduction, as well as thermal radiation. A thermal constant analyzer measured the influence of gas pressure, atmosphere, and temperature on the thermal conductivity of nano-porous materials using the transient plane source (TPS) method. Results showed that the experimental thermal conductivity values ...
Asphalt solar collector (ASC) is a conductive asphalt concrete and an eco-friendly method to de-ice roadways. This study examined if the addition of conductive fillers and various mixing parameters could improve the thermal conductivity and energy efficiency of ASC. A thermal conductivity system measured the thermal conductivity of the concrete samples using the transient plane source (TPS) method. Results showed that thermal conductivity was mostly improved by higher asphalt temperatures, ...
