In this paper, the simplified hot-plate method (SHOP) measured the thermal conductivity of a prototype instrument, and artificial neural networks (ANNs) were employed to confirm the results. The goal of this paper was to produce ANNs to calibrate and improve the accuracy of SHOP thermal conductivity measurements. A thermal constants analyzer verified the results of the SHOP by measuring the thermal conductivity of plywood and calcium silicate boards using the ...
Cadmium sulfide (CdS) nanoparticles were dispersed in a polystyrene (PS) matrix to synthesize semiconducting optical nanocomposites for industrial applications. In this paper, many characteristics of the PS-CdS thick films were studied including thermal conductivity using the transient plane source (TPS) method. Results showed that the thermally conductive CdS nanoparticles enhanced the thermal conductivity of the nanocomposites....
Phosphosilicate ceramics with varying compositions were synthesized through the sol-gel process and the thermal conductivity of the samples was measured using the transient plane source (TPS) method. Results showed that the thermal conductivity of phosphosilicate ceramic powder was low, but increased slightly with phosphorous concentration. The low thermal conductivity of the ceramics could be useful in thermal barrier applications....
This article briefly explains the transient plane source technique. This method is used to simultaneously measure thermal conductivity and thermal diffusivity of solids. A Kapton insulated nickel sensor emits electrical currents into a sample that is sandwiched around the heat source which measures thermal properties....
In this paper, thermal properties of CdS and ZnS nanoparticles are examined to understand heat transfer behavior through polystyrene (PS) composites. The transient plane source (TPS) method was used to measure the thermal conductivities of the CdS/PS and ZnS/PS nanocomposites. Results showed that the nanocomposites followed a similar increasing trend until a common temperature where each sample adopted a constant thermal conductivity. Overall, the ZnS/PS nanocomposites showed ...
