Thermophysical properties of a uranium-6 wt. % zirconium alloy were investigated at high temperatures to evaluate the performance of the alloy as a driver fuel for a liquid-metal cooled fast reactor. Of particular interest to the authors were the coefficient of thermal expansion, the specific heat, and the thermal conductivity of the alloy....
Inorganic polymers (geopolymers) with varying chemical compositions were subjected to a number of tests in an effort to demonstrate that varying their chemical composition, as well as curing conditions can allow researchers to create geopolymers that fit specific applications based on their microstructure, thermal conductivity, mechanical strength and reliability, and thermal shrinkage behavior....
This research studied the effect of the addition of vinyl-modified silica and raw silica additions to polymer-silica nanocomposite foams. Extensive physical property characterization was undertaken after their addition to quantify their influence. TEM found that silica particles added through the vinyl-modified silica dispersed better than the raw silica. This created foams with a higher density and smaller cell size. A slight reduction in the thermal conductivity after the additions was ...
Rigid foams were prepared using quebracho tannins and their physical and thermal properties were determined experimentally. These properties were then compared to those of rigid foams derived from mimosa tannins and pine tannins to determine if the nature of the flavonoid affects the properties of the foams. It was found that the preparation of the quebracho tannin-based foams involved the same formulation as that of mimosa tannin-based foams, whereas the ...
Ultralow density silica aerogels were formulated by sol-gel process using tetramethyl orthosilicate as the precursor. A supercritical drying step was performed using acetonitrile solvent extraction. These aerogels were found to have a high specific surface area (~812m2/g) and they were found to be excellent thermal insulators with thermal conductivities ranging from 0.024 to 0.043 W/m K at temperatures up to 400oC....
