The effective thermal conductivity and thermal diffusivity were investigated for polyaniline (PANI) composites containing iron and manganese at varying temperatures. Composites were prepared containing 100% Fe, 50% Fe and 50% Mn, and 100% Mn. It was determined that both the effective thermal conductivity and effective thermal diffusivity increased with increasing iron content. The authors attribute this increase to the increase in crosslinking density between the nitrogen in PANI and Fe....
The effective thermal conductivity and thermal diffusivity of polymer composites consisting of phenolformaldehyde matrix and oil palm empty fruit bunch (OPEFB) fibers were determined using the transient plane source method. The polymer composites were treated with one of alkali, silanol, or acetic acid to determine the effects of each treatment on the thermo-physical properties of the composites. The effect of temperature on these properties was also evaluated. It was determined ...
Carbon/liquid-crystal polymer composites were formulated. Composites containing one of three types of carbon filler, composites containing two types of carbon filler, and composites containing all three types of carbon filler were prepared to test not only the effect of each filler on the thermal conductivity of the composite, but also the effect of combining fillers. The anisotropic method on a TPS system was used for the thermal conductivity measurements. ...
This research studied the effect of the addition of vinyl-modified silica and raw silica additions to polymer-silica nanocomposite foams. Extensive physical property characterization was undertaken after their addition to quantify their influence. TEM found that silica particles added through the vinyl-modified silica dispersed better than the raw silica. This created foams with a higher density and smaller cell size. A slight reduction in the thermal conductivity after the additions was ...
The mechanical and thermal properties of blends of cis-polyisoprene (CPI) and trans-polyisoprene (TPI) are investigated and compared to those of the pure elastomers. It was found that the elastic modulus and tensile strength increased with increasing TPI content and that the thermal conductivity, thermal diffusivity, and specific heat of the blends also increased with increasing TPI content. In contrast to this trend, the measured thermal properties of pure TPI were ...
