The thermal and mechanical properties of PS/PMMA immiscible polymer blends were investigated. The effects of the dispersion of CdS nanoparticles on these properties were also investigated. The dispersion of the nanoparticles was found to result in an increase in glass transition temperature, as well as the thermal conductivity. The PS matrix was found to become more brittle and the PMMA matrix was found to become more compact upon the ...
The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....
The effects of intrinsic thermal conductivity, carbon filler geometry, and interface thermal resistance on the effective thermal conductivity of polymer composites were investigated. It was found that the length of carbon fillers and the interface thermal resistance were the dominant factors in determining the effective thermal conductivity of the composites. The authors suggest that the most thermally conductive polymer composite would contain long carbon nanofibers that have undergone surface functionalization ...
Graphite nano-platelets (GnPs) were dispersed in polyethylene glycol (PEG)/polymethyl methacrylate (PMMA) to form a PEG/PMMA/GnPs composite organic form-stable phase change material. The effects of the incorporation of the GnPs on the morphological, structural, thermal, and electrical properties of the composite were then assessed. The experimental results indicated that the incorporation of the GnPs into the polymer increased the thermal and electrical conductivities, and it was concluded that ...
Styrene-butadiene (SBR) was added to high-density polyethylene (HDPE) to form a polymer blend. The thermal conductivity and thermal diffusivity of this polymer blend at room temperature were determined at varying blend compositions. The effects of dynamic crosslinking with sulfur crosslinking system and a mixed system on the thermal conductivity and diffusivity were also investigated. Finally, different models were evaluated for the estimation of thermal conductivity of a two phase system....