Adding conductive fillers to polymer resins improves the thermal conductivity of the polymers. In this study, Thermocarb TC-300 synthetic graphite and Fortafil 243 carbon fiber were added to Vectra A950RX liquid crystal polymer (LCP) to produce anisotropic single and multiple filler composites. A Thermal Constants Analyzer measured the thermal conductivity of the composites using the transient plane source (TPS) technique. The formulations that contained Thermocarb fillers had higher in- and ...
Phase change materials (PCMs) are becoming increasingly important in the field of thermal energy storage. In this study, conductive fillers were added to wax- and polyethylene-based PCMs to improve their thermal conductivity. A Thermal Constants Analyser measured the thermal conductivity of the PCMs using the transient plane source (TPS) method. Results indicated that both nanoparticles improved thermal conductivity, but a lower concentration of expanded graphite improved conductivity more than normal ...
As technology advances, improving the efficiency of heat dissipation by thermal adhesives in electronic devices is becoming increasingly important. In this study, a thermal constants analyzer measured the thermal conductivities of eight different epoxy resin thermal adhesives using the transient plane source (TPS) method. Results showed that the layer-structure fillers enhanced the thermal conductivity of the epoxy matrix the most, while the sharp corner-shaped fillers had the lowest impact on ...
Phase change materials (PCMs) can be used as heat sinks to manage high temperature fluctuations in electronics. In this paper, a heat sink was generated from a paraffin/expanded graphite composite PCM, and the thermal conductivities of the materials were measured using the transient plane source (TPS) method of the Thermal Analyzer. Results showed that the composite PCM had a significantly higher thermal conductivity than the pure paraffin....
The authors outline a method of enhancing the thermal properties of a paraffin phase change material through the addition of herringbone-style graphite nanofibers (HGNFs). It was found that the solid-phase thermal conductivity increased exponentially with the presence of HGNFs; however, a significant increase in the liquid-phase thermal conductivity was not observed until the concentration of HGNFs in the composite PCM reached a point above the percolation threshold. The volumetric heat ...
