Thermal energy storage (TES) is incredibly important to expanding the field of renewable energy. In this study, the authors look at the potential of composite phase change materials (PCMs) for use in this application. A ball milling method was used to exfoliate expanded graphite in nanosheets that could be added to eicosane to create composite materials. Composites with nanosheets of various sizes were created, and the effect of cooling rate ...
HVAC systems have become very popular, but require a lot of thermal storage. One way to provide this storage is through phase change materials (PCM). This report investigates using expanded graphite to improve the thermal conductivity of a capric, lauric and oleic acid mixture PCM. It was found that with the increase in mass fraction of expanded graphite the thermal conductivity of the PCM also increases....
Preventing steel from losing its strength during fires is crucial for safe evacuation and effective fire fighting. One of the most common protective coatings applied to steel and other construction materials today is intumescent paint. In this study, researchers created a potential new protective coating using a curable silicone base and varying volume amounts of expandable graphite between 5-25%. The key characteristic of these coatings is that they swell to ...
This study is to determine the thermal properties of a paraffin/red brick composite to determine its viability as a form-stable phase change material. Extended graphite was also added to the composite to improve its thermal conductivity. The thermal conductivity for this material was measured using a transient plane source (TPS) method. By adding the paraffin, the thermal conductivity of the composite increase, also by adding extended graphite the thermal ...
Graphite papers can enhance mechanical properties while lowering electrical properties, however, to generate conducting membranes, the chemical and thermal characteristics of the papers require further reduction. In this study, mercaptobenzene (MB) functionalized graphite and epoxy-based hybrid membranes were prepared and analyzed. A thermal analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results showed that the powder-pressed pellets made of graphite-MB-gold nanoparticles (AuNPs) had ...
