Polyactic acid (PLA)-micro hexagonal boron nitride (hBN)-graphene nanoplatelet (GNP) polymer composites were prepared, and the effects of varying filler contents on the thermal and mechanical properties of the polymer composites were investigated. It was determined that the addition of the GNPs resulted in a decrease in thermal conductivity in comparison to a PLA-hBN composite unless the GNP:hBN ratio was 1:1, where the thermal conductivity was equal to that ...
Four different paraffin-based nanocomposite phase change materials (PCMs) were prepared by dispersion of 20 v. % of graphene, multi-walled carbon nanotubes (MWCNTs), aluminum, or TiO2 nanoparticles into a paraffin matrix. It was found that the two carbon-based nanoparticles reduced the time required for melting and solidification of the PCM by a greater amount than the two other nanoparticles. The graphene-paraffin PCM was found to reduce the melt and re-solidification time by the ...
The influence of In content in the Se98-xAg2Inx (x = 0, 2, 4, 6) system of chalcogenide glasses on the physical properties of the glasses were investigated by the authors. The maximum thermal conductivity and thermal diffusivity value was observed for the sample containing 2 at. % In. The microhardness was found to initially decrease upon doping of In for Se; however, it began to slowly increase after a certain In content had been attained. ...
The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....
A paraffin-based composite phase change material (PCM) was prepared by the addition of hexagonal boron nitride (h-BN) nanosheets to melted paraffin wax followed by vigorous stirring. The nanosheets were added in quantities ranging from 1 to 10 wt. %. A reference sample of pure paraffin was also prepared. It was determined that the addition of h-BN nanosheets resulted in an increase in thermal conductivity and that the melting and solidification rates were also ...
