In this paper, polyamide (PA, composed of at least 60% renewable materials) was used as a polymer matrix to prepare PA-hexagonal boron nitride (hBN) polymer composites with varying hBN contents. Two different PA samples were used in this study: a low viscosity grade PA (PA-30), as well as a high viscosity grade PA (PA-90). The composite polymers were tested to evaluate their thermal, physical, and mechanical properties. It was concluded that ...
Polyactic acid (PLA)-micro hexagonal boron nitride (hBN)-graphene nanoplatelet (GNP) polymer composites were prepared, and the effects of varying filler contents on the thermal and mechanical properties of the polymer composites were investigated. It was determined that the addition of the GNPs resulted in a decrease in thermal conductivity in comparison to a PLA-hBN composite unless the GNP:hBN ratio was 1:1, where the thermal conductivity was equal to that ...
As electronics get smaller and more powerful, the packaging that contains them must in turn become lighter with higher thermal conductivity and electrical resistivity. This study tested the effect of adding highly concentrated hexagonal boron nitride (hBN) fibers to liquid crystal polymer. The fibers were oriented in a way to achieve a high filler concentration, and the composites were then randomly added to a polyactide matrix. The researchers found that ...
Hexagonal boron nitride (h-BN) was used as filler in varying concentrations to form composite polymers with polyactic acid, polyamide, and polyphenylene sulfide. The objective of this work was to produce a composite polymer with a high thermal conductivity for use as electronics packaging. It was determined that although thermal conductivity increased with increasing filler content, it was not necessarily due to the increased number of filler particles present, but rather ...
The development of environmentally sustainable materials for use in the management of heat in electronics is becoming increasingly important. Currently the majority of materials that are used for this purpose are oil-based. In this article, the thermal transport, physical, electrical, and mechanical properties of a bio-based polymer matrix (polyactic acid) with embedded hexagonal boron nitride were studied to determine if this would be a practical material for use in the ...