Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
A paraffin-based composite phase change material (PCM) was prepared by the addition of hexagonal boron nitride (h-BN) nanosheets to melted paraffin wax followed by vigorous stirring. The nanosheets were added in quantities ranging from 1 to 10 wt. %. A reference sample of pure paraffin was also prepared. It was determined that the addition of h-BN nanosheets resulted in an increase in thermal conductivity and that the melting and solidification rates were also ...
Autoclaved aerated concrete was studied because it has potential to be used in the design of energy-efficient buildings. Three different samples were tested, each with a unique density. Of particular interest to this work was the thermal conductivity of the samples, as this material would be used as a thermally insulating concrete. The thermal conductivities were measured at various percentages of moisture content, and it was found that increasing moisture ...
The addition of graphene nanoplatelets (GNP) to a paraffin-based solvent, eicosane was performed at various wt.% and subsequently the synthesized GNP/eicosane composites were analyzed by a variety of machines. The characterization of the GNP/eicosane composites was performed by the TPS technique for the measurement of thermal conductivity from 10°C to 35°C. At a wt.% of 10 GNP filler the composite had a thermal conductivity four times that of unfilled ...
