Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

EN

Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: fillers

Total Papers Found: 58

The effect of silanize alumina nano-fillers addition on some physical and mechanical properties of heat cured polymethyl methacrylate denture base material 

Despite its fragility, poor thermal properties, and high water sorption rates, polymethyl methacrylate (PMMA) is commonly used in denture fabrication. This study aimed to examine how the addition of Aluminum oxide nanoparticles affected the properties of PMMA. A thermal constant analyzer measured the thermal properties of the Al2O3 nanoparticles using the transient plane source (TPS) method. Results showed that the thermal conductivity and thermal diffusivity of acrylic resin improved ...

Author(s): ,

Thermal conductivity models for single and multiple filler carbon/liquid crystal polymer composites 

Adding conductive fillers to polymer resins improves the thermal conductivity of the polymers. In this study, Thermocarb TC-300 synthetic graphite and Fortafil 243 carbon fiber were added to Vectra A950RX liquid crystal polymer (LCP) to produce anisotropic single and multiple filler composites. A Thermal Constants Analyzer measured the thermal conductivity of the composites using the transient plane source (TPS) technique. The formulations that contained Thermocarb fillers had higher in- and ...

Author(s): , , ,

Thermally conductive phase-change materials for energy storage based on low-density polyethylene, soft Fischer-Tropsch wax and graphite 

Phase change materials (PCMs) are becoming increasingly important in the field of thermal energy storage. In this study, conductive fillers were added to wax- and polyethylene-based PCMs to improve their thermal conductivity. A Thermal Constants Analyser measured the thermal conductivity of the PCMs using the transient plane source (TPS) method. Results indicated that both nanoparticles improved thermal conductivity, but a lower concentration of expanded graphite improved conductivity more than normal ...

Author(s): , , ,

Thermal conductivity enhancement with different fillers for epoxy resin adhesives

As technology advances, improving the efficiency of heat dissipation by thermal adhesives in electronic devices is becoming increasingly important. In this study, a thermal constants analyzer measured the thermal conductivities of eight different epoxy resin thermal adhesives using the transient plane source (TPS) method. Results showed that the layer-structure fillers enhanced the thermal conductivity of the epoxy matrix the most, while the sharp corner-shaped fillers had the lowest impact on ...

Author(s): , , ,

Effect of Particle Shape on Thermal Conductivity of Copper Reinforced Polymer Composites

Copper powder was used a filler and added to a polyamide matrix in order to generate copper reinforced polyamide composites. The copper powder came in three different forms: short fibers, plates and spheres. The short fibers were added to the polyamide matrix at a vol.% up to 30, and the plates and spheres up to 60 vol.%. Thermal conductivity was measured and it was found that at filler amounts below 10 vol.% the ...

Author(s): , ,