Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
This study investigates the effect changing the PH of a copper nanofluid and sodium dodecylbenzenesulfonate (SDBS) surfactant concentration has on the thermal conductivity of the nanofluid. The thermal conductivity was determined through the Hot Disk Transient Plane (TPS) method. As the PH is increased the thermal conductivity also increases because higher PH means more surface charges which increase conductivity. As the SDBS concentration is increased the thermal conductivity slightly increases ...
Diamond is an extremely conductive material that would be ideal for dissipating heat in microelectronics if it were not for its high price tag. In this study, cost effective copper- and chromium-diamond composites (uncoated (Cu/D), Cu-coated (Cu/CuD), and Cr-coated (Cu/CrD)) were produced to determine their potential use in heat sink applications. A Thermal Constant Analyzer measured the thermal conductivity of the matrix and composite samples using the ...
In this study, pure eicosane and eicosane-CuO solid composites were prepared using ambient and ice-water bath solidification methods. A Thermal Constants Analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) technique. Results showed that for both solidification methods, composite thermal conductivity was independent of temperature up to a point, and the composites with the highest nanoparticle concentrations had the highest thermal conductivity. Although the composites ...
Paraffin is an excellent phase change material (PCM) for latent heat storage, but it does not efficiently use stored energy because of its low thermal conductivity. In this study, nickel and copper foams were added to paraffin to enhance heat transfer. A Thermal Constants Analyzer measured the thermal conductivity of the paraffin composites using the transient plane source (TPS) method. The addition of copper foam enhanced the thermal conductivity of ...
Polyoxymethylene (POM) is a resistant polymer with wide applications in aerospace, automotives, and biomedicine. However, it falls short when used in the manufacturing of sliding parts. In this study, copper particles and polytetrafluoroethylene (PTFE) powder were incorporated into POM to improve the thermal conductivity of the polymer composite while reducing the friction coefficient. A thermal analyzer was used to measure the thermal conductivity of POM composites using the transient plane ...
