The transient plane source (TPS) technique has a wide range of applications because of its capability to test solids, liquids, powders, and anisotropic materials over a range of sizes. Thermal properties of thin films and coatings can also be characterized using the TPS method if the samples are placed between the sensor and a bulk background. To minimize errors with the TPS method, use identical materials on each side of ...
Thermally conductive pressure-sensitive adhesives (TC-PSA) are used in electronic devices and industrial applications. This paper examined how particle size, shape, and the addition of a coupling agent (GSP) affected the thermal conductivity of TC-PSA. A thermophysical properties analyzer measured the thermal conductivity of the particle-filled polymer using the transient plane source (TPS) method. Results showed that the thermal conductivity of the particles increased with diameter and aspect ratio, and the ...
Cadmium sulfide (CdS) nanoparticles were dispersed in a polystyrene (PS) matrix to synthesize semiconducting optical nanocomposites for industrial applications. In this paper, many characteristics of the PS-CdS thick films were studied including thermal conductivity using the transient plane source (TPS) method. Results showed that the thermally conductive CdS nanoparticles enhanced the thermal conductivity of the nanocomposites....
In this study, ultralow density silica aerogels were synthesized and their thermal conductivities were tested to determine how supercritical drying affected the samples. A thermal analyzer measured the thermal conductivity of the silica aerogels using the transient plane source (TPS) method which determined that the thermal conductivity of silica aerogels increased with temperature....
Phosphosilicate ceramics with varying compositions were synthesized through the sol-gel process and the thermal conductivity of the samples was measured using the transient plane source (TPS) method. Results showed that the thermal conductivity of phosphosilicate ceramic powder was low, but increased slightly with phosphorous concentration. The low thermal conductivity of the ceramics could be useful in thermal barrier applications....
