In this paper, the simplified hot-plate method (SHOP) measured the thermal conductivity of a prototype instrument, and artificial neural networks (ANNs) were employed to confirm the results. The goal of this paper was to produce ANNs to calibrate and improve the accuracy of SHOP thermal conductivity measurements. A thermal constants analyzer verified the results of the SHOP by measuring the thermal conductivity of plywood and calcium silicate boards using the ...
Lithium nitrate trihydrate (LiNO3·3H2O) has many traits that are desirable for thermal energy storage (TES) materials. This study tests the thermophysical properties of LiNO3·3H2O between 253-353 K in comparison to effective TES materials: water and paraffin. A TPS system measured the thermal conductivity of the solid LiNO3·3H2O samples using the transient plane source (TPS) method. Results showed that LiNO3·3H2O had a higher ...
The purpose of this this study was to graft polymer chains onto the surface of carbon nanotubes (CNTs) to examine the morphology and thermal properties of the epoxy composites in comparison to multiwalled carbon nanotubes (MWCNTs). A thermal analyzer measured the thermal conductivity of the nanocomposites using the transient plane source (TPS) technique. Results showed that the addition of Glycidyl methacrylate (GMA) to the MWCNTs/epoxy composites significantly enhanced thermal ...
As electronic devices approach nanometer scales, heat distribution becomes nonuniform and hot spots begin to form. Integrating graphene into nanoelectronics enhances thermal conductivity and heat flow which mitigates hot spots. In this experiment, large quantities of graphene were produced and thermal conductivity was measured by the transient plane source (TPS) method using an instrument. Results showed that the addition of graphene greatly improved the thermal conductivity of the thermal interface ...
In this paper, cost efficient RVC foams were fabricated from household cleaning pad waste (CPW) and sucrose. A thermal analyzer measured the thermal conductivity of the RVC foams using the transient plane source (TPS) method. Results showed that the thermal conductivity of the CPW foams were significantly lower than Ultramet’s RVC foams which are highly insulative. This study proved that it is possible to reproduce low-cost carbon foams from ...
