Zinc sulfide nanoparticles were embedded in a poly(methyl methacrylate) matrix to prepare a nanocomposite polymer with a higher thermal conductivity than the pure polymer. It was determined by TEM that at a low concentration of filler particles, the particles are uniformly dispersed throughout the matrix; however, at higher concentrations, agglomeration of the filler particles occurs. The effective thermal conductivity for all samples was found to increase with increasing temperature ...
Metal doping of a polypyrrole matrix was carried out. Nickel and Cobalt were the two metals that were used in this study, and three samples were prepared, one containing 100% Co, one containing 50% Co and 50% Ni, and finally, one containing 100% Ni. The effective thermal conductivity and thermal diffusivity were evaluated, and it was determined that metal doping of the polymer matrix resulted in increases in both the thermal conductivity, and the ...
The thermal and mechanical properties of PS/PMMA immiscible polymer blends were investigated. The effects of the dispersion of CdS nanoparticles on these properties were also investigated. The dispersion of the nanoparticles was found to result in an increase in glass transition temperature, as well as the thermal conductivity. The PS matrix was found to become more brittle and the PMMA matrix was found to become more compact upon the ...
The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....
The transient plane source (TPS) method was used to measure the thermal conductivity of automotive coolants, as well as equivalent nanofluids to these coolants. The results of the study indicated that the TPS was able to accurately measure the thermal conductivity, with an error of between 2 and 4%....
