Paper that presents a slightly modified version of the early transient plane source technique which allowed the easier measurement of thermal transport properties of solid materials. A series of building materials were tested spanning thermally conductive to thermally insulating materials including extruded polystyrene, polymethyl methacrylate (PMMA), stainless steel and aluminum. This modified method allow the measurement of thermal conductivity values from 0.02 W/mK to 200 W/mK....
Thermal interface resistance results from small gaps and surface geometry mismatches between two materials that make up a composite. Thermal interface resistance is present in most any material that is comprised of two or more components. In the field of thermal interface materials, the majority of novel materials are composites, and thus are subject to thermal interface resistance and thermal boundary resistance (thermal discontinuity at a perfectly bonded interface of ...
The authors highlight different methods of studying the purity, composition, and structural changes of polymeric and glass materials. These methods include the use of differential scanning calorimetry (DSC) and the transient plane source (TPS) technique. The quality of the TPS Technique is outlined and the authors praise the high quality of the machine. In addition to this, thermal analysis is carried out on some polymeric composites (cis-polyisoprene (CPI)/trans-polyisoprene (TPI) ...
The addition of graphene nanoplatelets (GNP) to a paraffin-based solvent, eicosane was performed at various wt.% and subsequently the synthesized GNP/eicosane composites were analyzed by a variety of machines. The characterization of the GNP/eicosane composites was performed by the TPS technique for the measurement of thermal conductivity from 10°C to 35°C. At a wt.% of 10 GNP filler the composite had a thermal conductivity four times that of unfilled ...
The TPS technique was used to measure the thermal conductivity of three different steel samples, which allowed the researchers to analyze the steel critically. Specifically look at was the dependence of thermal conductivity on temperature from room temperature up to 300°C. The obtained results were compared values obtained from other research groups....
