Measurements were carried out to determine the electrical resistivity, thermal conductivity and Seebeck coefficients of a series of Fe-doped misfit-layered oxides (Ca3Co(4-x)Fe(x)O(9+delta) (x=0, 0.05, 0.1, and 0.2)). The thermal conductivity experiments were carried out using a Thermal Constants Analyzer via the TPS technique. XRD was also used to characterize the Fe-doped oxides. Overall, the transport properties of the Fe-doped oxides were studied and it was found that ...
Yttria-stabilized zirconia (YSZ) was synthesized by the spark plasma sintering process to generate pore-free, homogenous bulk samples that were then tested for thermal conductivity, which was measured by two separate methods: TPS and LFT. The TPS method was found to be better for measuring of thermal conductivity in this specific case. Using the phonon-hopping model (PHM) the authors were able to determine how grain boundaries of the bulk samples affected ...
Two calcium silicate boards of different densities, porosities and pore size were analyzed for their thermal properties, specifically thermal conductivity. The boards were heated from room temperature to 400°C and the thermal conductivity was monitored during this time. A separate experiment 'aged' the boards first by heating at 1000°C for 4 hours before testing the thermal conductivity from room temperature to 400°C once again. The experimental results were compared with three ...
The authors obtained a collection of crosslinked closed cell polyethlyene foams from a commercial supplier and then characterized the thermal properties of these foams. The characterization involved the use of the TPS technique to measure thermal conductivity, thermal diffusivity and specific heat capacity. It was found that increasing density resulted in a decreased thermal diffusivity and an increased specific heat capacity per unit volume. A theoretical model was developed to ...
The authors created a series of composite latent storage materials (CLSM) using expanded graphite (EG) and a two different metal nitrate phase change materials (K and Li, K and Na). The steady-state comparative method was used in order to measure thermal conductivities because it was deemed the best technique. Properties investigated that were related to the effective thermal conductivity were material temperature and microstructure and their effect on thermal conductivity....
