In this article, the authors present a novel method for the synthesis of graphene layers that can be used in advanced electronic devices, among other applications. The preparation method involves the use of a high-pressure high-temperature process where the pressure and temperature are closely monitored in order to preferentially prepare graphene layers. The quality of the material synthesized is much better than previously reported, and the size of the layers ...
Nanocomposites were prepared by the mixing of multi-walled carbon nanotubes (MWCNTs) with nitrile and hydrogenated nitrile elastomers (NBR and HNBR). A variety of methods including TEM, SEM, and XRD were used in order to investigate the morphology of the nanocomposites. Many mechanical properties of the nanocomposites were measured and reported. A machine was used to measure the thermal properties of the synthesized nanocomposites....
High speed microscopy was used to allow real time visualization of the movement of nanoparticles made up of single-walled carbon nanotubes (SWCNT) and Fe2O3. An electrostatic force was induced to the nanotube/Fe2O3 composite and caused perfect conjugate structures which result in excellent thermal, electrical, and mechanical properties. The alignment of the carbon nanotubes in nanosuspensions may offer new opportunities for the development of nanofluids....
The addition of graphene nanoplatelets (GNP) to a paraffin-based solvent, eicosane was performed at various wt.% and subsequently the synthesized GNP/eicosane composites were analyzed by a variety of machines. The characterization of the GNP/eicosane composites was performed by the TPS technique for the measurement of thermal conductivity from 10°C to 35°C. At a wt.% of 10 GNP filler the composite had a thermal conductivity four times that of unfilled ...
The present study look at the creation of unfilled and carbon nanofibre (CNF)-filled polypropylene (PP) foams, and their subsequent testing of thermal and mechanical properties. The testing of thermal properties was accomplished by the TPS Technique and determined that when using up to 20 wt.% CNF as filler there was no increase in thermal conductivity of any of the sample foams. Therefore it was decided that it was the foamed ...
