Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
In this paper, polyamide (PA, composed of at least 60% renewable materials) was used as a polymer matrix to prepare PA-hexagonal boron nitride (hBN) polymer composites with varying hBN contents. Two different PA samples were used in this study: a low viscosity grade PA (PA-30), as well as a high viscosity grade PA (PA-90). The composite polymers were tested to evaluate their thermal, physical, and mechanical properties. It was concluded that ...
Polyactic acid (PLA)-micro hexagonal boron nitride (hBN)-graphene nanoplatelet (GNP) polymer composites were prepared, and the effects of varying filler contents on the thermal and mechanical properties of the polymer composites were investigated. It was determined that the addition of the GNPs resulted in a decrease in thermal conductivity in comparison to a PLA-hBN composite unless the GNP:hBN ratio was 1:1, where the thermal conductivity was equal to that ...
A paraffin-based composite phase change material (PCM) was prepared by the addition of hexagonal boron nitride (h-BN) nanosheets to melted paraffin wax followed by vigorous stirring. The nanosheets were added in quantities ranging from 1 to 10 wt. %. A reference sample of pure paraffin was also prepared. It was determined that the addition of h-BN nanosheets resulted in an increase in thermal conductivity and that the melting and solidification rates were also ...
A disc of a composite ceramic material composed of silicon nitride (Si3N4) and 20% hBN was prepared and its tribological characteristics were investigated by sliding a Si3N4 pin across its surface at different sliding speeds. The friction coefficient and wear coefficient were determined for the composite using two different test modes: one in which the pin was kept stationary and the disc was rotated on top of the pin, ...
The authors examine the melting and crystallization behavior of a polyethylene/boron nitride composite to understand an unexpected exothermic peak when the BN content was greater than 10 wt. %. Based on these observations, an optimal annealing temperature of the composite was investigated to enhance its thermal conductivity. The appearance of the peak was determined to depend on the different nucleated capability of the different BN aggregates in local area. An annealing ...
