Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Xu Xu

Total Papers Found: 4

Enhanced thermal conductivity of ethylene glycol-based suspensions in the presence of silver nanoparticles of various sizes and shapes

Silver (Ag) has the highest thermal conductivity of all metals, making it an attractive nanoparticle for use in heat transfer systems. The shape of nanoparticles influences their thermal conductivity, so three varieties of Ag nanoparticles were tested in this study. The Thermal Constants Analyser measured the thermal conductivity of Ag nanospheres (NSs), nanowires (NWs), and nanoflakes (NFs) between 10-30 °C using the transient plane source (TPS) method. Results showed that ...

Author(s): , , , , , , ,

Effects of melting temperature and the presence of internal fins on the performance of a phase change material (PCM)-based heat sink

Two organic phase change materials (PCMs) were investigated to determine their effects on the thermal management capabilities of electronics. The thermo-physical properties of n-eicosane and 1-hexadecanol were determined experimentally, and the two PCMs were then added to unfinned, and finned heat sinks. It was determined that a PCM with a high melting point is able to increase the time of protection from overheating; however, it was also determined that if ...

Author(s): , , , , , , , , ,

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

Autoclaved aerated concrete was studied because it has potential to be used in the design of energy-efficient buildings. Three different samples were tested, each with a unique density. Of particular interest to this work was the thermal conductivity of the samples, as this material would be used as a thermally insulating concrete. The thermal conductivities were measured at various percentages of moisture content, and it was found that increasing moisture ...

Author(s): , , , ,

Experimental Measurements of Thermal Conductivity of Wood Species in China: Effects of Density, Temperature, and Moisture Content

The authors selected 5 types of softwood species and 5 types of hardwood species that are commonly grown and used for construction in China for thermal analysis. Not only was thermal conductivity measured, but its dependence on moisture content, density and temperature of the wood samples was also investigated. Thermal conductivity was found to increase with increasing density of the wood sample and increasing moisture content. Thermal conductivity was also found to ...

Author(s): , , , ,