Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
In this study, various filler loadings of thin graphite sheets were added to epoxy adhesives to improve thermal conductivity. Natural graphite powder and graphite nanoflakes were used as reference fillers in the same resin, and the thermal conductivity of each filler was measured with a TPS thermal constants analyzer based on the transient plane source (TPS) method. Results showed that the graphene sheets enhanced the thermal conductivity by more than 22 ...
Asphalt solar collector (ASC) is a conductive asphalt concrete and an eco-friendly method to de-ice roadways. This study examined if the addition of conductive fillers and various mixing parameters could improve the thermal conductivity and energy efficiency of ASC. A thermal conductivity system measured the thermal conductivity of the concrete samples using the transient plane source (TPS) method. Results showed that thermal conductivity was mostly improved by higher asphalt temperatures, ...
Seasonal thermal storage based on phase change materials (PCMs) require a thermally conductive host because they typically have low thermal conductivities. In this study, tannin-based composite carbon foams were prepared using thermally conductive exfoliated graphite (EG) fillers and pMDI additives. A thermal analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results showed that the EG-carbon foams and the EG/pDMI-carbon foams showed significantly ...
Conductive polymer composites (CPCs) contain high concentrations of carbon nanotubes (CNTs) to maximize electrical conductivity. However, high nanoparticle concentrations degrade other important properties of CPCs. This study produced CPCs using ultrahigh molecular weight polyethylene (UHMWPE) fillers in place of CNTs in an attempt to maintain important physical and mechanical properties. A thermal analyzer measured the thermal conductivity of the CPC samples using the transient plane source (TPS) method. Results showed ...
This study aimed to enhance the thermal and mechanical properties of polyethylene (PE)/boron nitride (BN) composites by manipulating the BN concentrations in the matrix and by applying shear fields in laminating-multiplying elements (LMEs). A thermal constants analyzer measured the thermal conductivity of the PE/BN composites using the transient plane source (TPS) method. Results showed that the thermal conductivity of the composites increased with BN concentration. As well, the ...