Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Using the transient plane source (TPS) technique, the effect of addition of pine tree particles to styrene butadiene rubber is studied. Thermal conductivity, thermal diffusivity, specific heat capacity and density were all investigated. Varying amounts of the pine tree filler particles were added to the polymer matrix in order to form composites. Increasing amounts of the pine tree filler resulted in higher thermal conductivity and thermal diffusivity, with decreasing specific ...
The authors prepared PMMA/clay composites by the in situ bulk polymerization method. The prepared composites were characterized by FT-IR, WAXRD, SEM, TEM, DMA and the transient plane source (TPS) technique to measure thermal conductivity. Not only were the thermal properties of the composites studied, but physical and chemical properties as well....
The thermal conductivity and diffusivity of a series of three-phase styrene butadiene composites were investigated using the transient plane source (TPS) technique. Both of the series contained a variable amount of natural rubber, as well as variable amounts of silica and clay. The thermal properties decreased sharply at 10 phr filling, but increased subsequently after that. It was determined that silica resulted in better (higher) thermal properties as compared to clay....
Oil-palm fiber reinforced phenolformaldehyde composites were prepared and then tested for their thermal properties. Thermal conductivity and diffusivity were measured using the transient plane source (TPS) technique. The composites were then treated using different methods (alkali, silane and acetic acid treatments) and the thermal conductivity and diffusivity were measured again to see how the treatment affected the thermal properties of the composite. It was found that thermal conductivity increased varying ...