Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Transient plane source (TPS) method

Total Papers Found: 422

Effect of different hybrid method on properties of carbon nanotubes/dolomite hybrid filled phenolic composites

The article investigated the hybridization of multi wall carbon nanotubes (MWCNTs) with filler in polymer matrix composites (PMC) which is one of the techniques used to combine different properties of fillers to make more unique composites. The properties of two different hybrid filler composites (Chemical Vapour Deposition (CVD) hybrid filler and physically hybrid filler) were then studied. The thermal conductivity was measured through the use of a Thermal Constant Analyzer ...

Author(s): , , , ,

Fabrication and characterization of nanostructured La2Zr2O7 fibers

This article explored the various characteristics of nanostructured pyrochlore La2Zr2O7 fibers. The thermal properties were measured using the transient plane source (TPS) method on a thermal anlyzer instrument at room temperature. It was found that the samples exhibited low thermal conductivities. It was observed that the thermal conductivity of the samples decreased with increasing silica content in the fiber. However, low thermal ...

Author(s): , , , ,

High-entropy alloys as high-temperature thermoelectric materials

This article presented the high temperature properties of high-entropy alloys (HEAs) that will potentially be used as thermoelectric (TE) generator materials. The high temperature thermal conductivity was analyzed using the transient plane source (TPS) method through the use of a Thermal Constant Analyser. From the experimental results, it was concluded that HEAs may be used as high-performance bulk TE materials at high temperatures due to their potential to reach low ...

Author(s): , , , , ,

Thermal and Tribological Properties of Phenolic/CNT-Alumina hybrid Composites

In this article, the thermal and tribological properties of Phenolic/Carbon Nanotube (CNT)-Alumina Hybrid composites were examined. One of the main properties that was measured was the thermal conductivity, which was measured using the transient plane source (TPS) method with the use of a Thermal Constant Analyzer. The experiment compared the thermal conductivities of the hybrid composite, mixed phenolic composite, and pure phenolic to determine which one had the ...

Author(s): , , ,

Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools

This study examined the temperature that develops in the tool cutting process during rough turning on an experimental basis by using a model for the polycrystalline cubic boron nitride (PCBN) tool. The cutting tool temperature has significant effect on the future performance of a tool and the quality of its machined component and is therefore important to explore. The thermal conductivity of the PCBN tools was determined at room temperature ...

Author(s): , , , ,