Thermal conductivity measurements were performed on nylon-12 powder over the temperature range from 40-170oC. The thermal conductivity was found to increase linearly over this temperature range. These measurements were performed in order to help better understand how properties of the powder change throughout the process of laser sintering. A one-dimensional model of the thermal energy transport in the powder bed was developed, and it was found to be qualitatively ...
Thermal conductivity, thermal diffusivity and specific heat are investigated for a granite rock sample from a deep borehole in central Portugal. Thirty-three samples were divided into two groups based on the degree of metasomatic alteration. It was found that the average thermal conductivity for the samples in the group comprising the less altered samples was 2.90 ± 0.26 W/m K, and for the more altered samples, the average value was 2.95 ± 0.19 W/m ...
Composite phase change materials were prepared using stearic acid, coffee grounds, and graphite. The coffee grounds were used as a supporting material for the stearic acid, and the graphite was added in an effort to enhance the thermal conductivity of the composite. The composites were characterized by SEM and FT-IR, the thermal conductivity was determined by the phase change temperature and latent heat were determined by differential scanning calorimetry. The ...
Styrene-butadiene (SBR) was added to high-density polyethylene (HDPE) to form a polymer blend. The thermal conductivity and thermal diffusivity of this polymer blend at room temperature were determined at varying blend compositions. The effects of dynamic crosslinking with sulfur crosslinking system and a mixed system on the thermal conductivity and diffusivity were also investigated. Finally, different models were evaluated for the estimation of thermal conductivity of a two phase system....
The effective thermal conductivity and thermal diffusivity were investigated for polyaniline (PANI) composites containing iron and manganese at varying temperatures. Composites were prepared containing 100% Fe, 50% Fe and 50% Mn, and 100% Mn. It was determined that both the effective thermal conductivity and effective thermal diffusivity increased with increasing iron content. The authors attribute this increase to the increase in crosslinking density between the nitrogen in PANI and Fe....