This article investigates the effect of aluminum doping on the thermal conductivity and other thermoelectric properties of nanostructured Zn1•XAlXTe (0 ≤ X ≤ 0.15) for a temperature range of 300 K – 600 K. The thermal conductivity was measured using the transient plane source (TPS) technique by a thermal constants analyzer. It was found that with increasing doping of aluminum, the thermal conductivity decreased, and with increasing temperature thermal conductivity also decreased. The decreasing of thermal ...
The mathematical model for a transient plane source (TPS) is based on a number of concentric ring sources with an infinitely small gap between sample and sensor (strips model). The purpose of this article is to create a model that accounts for the size of the sensor, three models were tested the disk, circles, and rings. The circles model gave almost exactly the same values for thermal conductivity as the ...
The thermal properties of oil palm shell (OPS) are investigated to determine if it could be used as a lightweight aggregate for a concrete mixture. The thermal conductivity, diffusivity, and specific heat were all tested through a transient plane source (TPS) method. The thermal conductivity and diffusivity both increased as the volume fraction of OPS increased. This is because OPS is very porous which gives it an inherently low thermal ...
This article investigates how the thermal conductivity of a resorcinol-formaldehyde aerogels varies with increasing resorcinol (R) to water (W) ratios. The thermal conductivity was measured using a transient plane source (TPS) method. As the R:W increases so does the thermal conductivity, this is because there is more conductive solids present to transfer more energy....
The high temperature fire resistance of vanadium is not well documented, so its properties are usually approximated to the same as conventional structural steels. The goal of this study is to determine the properties that influence the fire resistance of structural steel, thermal conductivity, specific heat and thermal elongation. Thermal conductivity and specific heat were both determined through a transient plane source (TPS) method. Vanadium and A36 steel were both ...
