The addition of graphene nanoplatelets (GNP) to a paraffin-based solvent, eicosane was performed at various wt.% and subsequently the synthesized GNP/eicosane composites were analyzed by a variety of machines. The characterization of the GNP/eicosane composites was performed by the TPS technique for the measurement of thermal conductivity from 10°C to 35°C. At a wt.% of 10 GNP filler the composite had a thermal conductivity four times that of unfilled ...
The present study look at the creation of unfilled and carbon nanofibre (CNF)-filled polypropylene (PP) foams, and their subsequent testing of thermal and mechanical properties. The testing of thermal properties was accomplished by the TPS Technique and determined that when using up to 20 wt.% CNF as filler there was no increase in thermal conductivity of any of the sample foams. Therefore it was decided that it was the foamed ...
Microencapsulated phase change materials (MPCMs) are excellent materials for the storage of thermal energy, and through their dispersal into a carrier fluid, microencapsulated phase change slurries (MPCS) can be prepared. These slurries exhibit both excellent thermal energy storage and heat transfer properties. A series of MPCS were prepared for this research and subsequently tested for thermal conductivity and specific heat. Other methods of quantification include DSC, TGA, rheometry, and infrared ...
The authors propose a fast and novel method for the synthesis of polyaniline nanofibers and their incorporation into DI-water as a nanofluid. The thermal conductivities of the nanofluids are measured from 10 °C to 80 °C by using the transient plane source (TPS) method. The particle loading amount of nanofibers affected the thermal conductivity of the nanofluids. Scanning Electron Microscopy (SEM) was used to characterize the physical properties of the nanofibers....
Thermally Exfoliated Graphite Oxide (TEGO) was mixed with natural rubber (NR) using a two-roll mill but the mixing of the TEGO with the NR didn't proceed as expected. Therefore the researchers had to modify the procedure and decided to pre-mix the TEGO and NR in an ultrasonically-assisted latex co-coagulation process followed by two-roll milling resulted in significant improvement in the thermal and electrical properties of the nanocomposite compared to the ...