Polyether Ether Ketone (PEEK)/hexagonal boron nitride (h-BN) nanocomposites were formed by a planetary ball milling process and hot compression molding in order to determine the effect of the addition of h-BN on the properties of PEEK. In particular, the tensile strength, friction and wear behaviors, morphology, hardness, thermomechanical properties, and thermal conductivity of the nanocomposite were examined. Hexagonal boron nitride was added in filler concentrations of up to 5 wt. %. ...
Author(s): Lei Shang, Linghan Xiao, Liu Liu, Ming Li, Xiuping Zhang, Yanjie Chang, Yuhui Ao
Seven different types of nanocrystals were used as additives in aluminosilicate bricks to determine if this is a valid method of decreasing the thermal diffusivity of the bricks for use as plant coating in the iron and steel industries. Each type of nanocrystal was added in concentration percentages of 0.5, 1, and 2 wt. % to determine the effect of concentration on thermal transport and physical properties. It was found that all of the ...
Author(s): Barbara Federica Scremin, Caterina Lorusso, Claudia Carlucci, Emanuela Filippo, Francesca Baldassarre, Francesca Conciauro, Gaetano Terranova, Giuseppe Ciccarella, Paolo Maria Congedo, Rosaria D'Amato, Viviana Vergaro
The authors set out to prepare cellular vitreous carbon (CVC) foams with varying thermal and physical properties. This was accomplished by using tannin-based resin modified by different isocyanates in varying amounts. Three different experimental procedures were used to prepare foams with different physical and thermal properties. Physical properties of the foams studied include density, as well as pore volume, pore size and cell diameter. The transient plane source (TPS) technique ...
Author(s): Alain Celzard, Antonio Pizzi, F. L. Braghiroli, M. C. Basso, V. Fierro, X. Li
The authors prepared PMMA/clay composites by the in situ bulk polymerization method. The prepared composites were characterized by FT-IR, WAXRD, SEM, TEM, DMA and the transient plane source (TPS) technique to measure thermal conductivity. Not only were the thermal properties of the composites studied, but physical and chemical properties as well....
Author(s): Chih-Bing Hung, Chih-Wei Peng, Hong-Ru Lin, Jui-Ming Yeh, Kung-Chin Chang, Mei-Chun Lai, Sheng-Chieh Hsu, Shyh-Shin Hwang
A series of Bi(2-x)Sb(x)Te3 powders were prepared via hydrothermal methods by varying x (x=1.45, 1.50, 1.55, 1.56). These powders were then heavily characterized by XRD, EDS, ICP-AES, TEM, SEM and the TPS technique. A low thermal conductivity was desired, so as to give the highest thermoelectric figure of merit (ZT). It was determined that the highest figure of merit was obtained when x=1.55, which resulted in a value of 1.65 ...
Author(s): Chia-Jyi Liu, Hsin -Chang Lai, Liang-Ru Chen, Yen-Liang Liu