This study investigates the properties of a material to be used as an energy storage medium that can use energy stored from the summer months, and then release it during the winter. The proposed material uses a graphite foam, with ZnO coatings with a flower like morphology, to house a sugar alcohol phase change material (PCM). The thermal conductivity of the material was measured using a transient plane source (TPS) ...
This study is to determine the thermal properties of a paraffin/red brick composite to determine its viability as a form-stable phase change material. Extended graphite was also added to the composite to improve its thermal conductivity. The thermal conductivity for this material was measured using a transient plane source (TPS) method. By adding the paraffin, the thermal conductivity of the composite increase, also by adding extended graphite the thermal ...
Seasonal thermal storage based on phase change materials (PCMs) require a thermally conductive host because they typically have low thermal conductivities. In this study, tannin-based composite carbon foams were prepared using thermally conductive exfoliated graphite (EG) fillers and pMDI additives. A thermal analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results showed that the EG-carbon foams and the EG/pDMI-carbon foams showed significantly ...
In this study, ultralow density silica aerogels were synthesized and their thermal conductivities were tested to determine how supercritical drying affected the samples. A thermal analyzer measured the thermal conductivity of the silica aerogels using the transient plane source (TPS) method which determined that the thermal conductivity of silica aerogels increased with temperature....
Nitrate materials play an important role in the development of latent thermal energy storage (LTES) systems. This paper examined the thermo-physical properties of sodium nitrate, potassium nitrate and their mixtures with expanded graphite (EG) additives for their applications in solar energy storage. The transient hot-wire method measured the apparent thermal conductivities of the nitrates and nitrates/EG mixtures. Results showed that nitrates/EG mixture PCMs with the highest concentrations of ...