Thermal interface materials (TIMs) are often used in electronic and microelectronic applications. It can be difficult to determine their characteristics once they are in-situ because it is hard to account for the surface roughness and waviness of the objects the TIM is applied to. This ...
This article reviewed the use of phase change materials (PCM) as thermal energy storages (TES) as they can be used to substitute large-scale energy demand and assist both economically and environmentally. The thermophysical properties of different phase change materials were studied to assess their viability ...
This paper focused on determining the thermal conductivity of multiwalled carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) that were dispersed throughout n-octadecane as phase change materials (PCMs). The Thermal Constants Analyzer TPS 2500S measured the thermal conductivity of the n-octadecane samples at solid and liquid ...
The purpose of this study was to improve the wettability of silicon carbide (SiC) nanowires, in order for them to be used as thermoconductive fluids. Multiple experiments were conducted by exposing the SiC nanowires to hydrofluoric acid, tetraethyl orthosillicate, polyvinylpyrolidone and sodium hydroxide. Various tests, ...
This study suggested the use of capric acid–palmitic acid–stearic acid ternary eutectic mixture/expanded graphite (CA–PA–SA/EG) composite phase change material (PCM), as a low-temperature heat storage material. With a mass ratio of CA:PA:SA = 79.3 : 14.7 : 6.0, the mixture was prepared and ...
