Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: phase change materials

Total Papers Found: 96

Long-term supercooled thermal energy storage (thermophysical properties of disodium hydrogenphosphate 12H2O)

This paper examined the thermophysical properties of hydrate using disodium hydrogenphosphate 12H2O to develop a long-term latent heat storage (LTLHS) using supercooling. The thermal conductivities of solid and liquid disodium hydrogenphosphate 12H2O were measured using the transient plane source (TPS) technique. Results showed that the thermal conductivity of liquid disodium hydrogenphosphate 12H2O increased slightly with temperature, whereas the solid phase showed a minor downward trend. Also, thermal ...

Author(s): , , ,

Temperature-dependent thermal conductivity of eicosane-based phase change materials with copper oxide nanoparticles

In this study, pure eicosane and eicosane-CuO solid composites were prepared using ambient and ice-water bath solidification methods. A Thermal Constants Analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) technique. Results showed that for both solidification methods, composite thermal conductivity was independent of temperature up to a point, and the composites with the highest nanoparticle concentrations had the highest thermal conductivity. Although the composites ...

Author(s): ,

A simplified approach for predicting temperature profile in steel members with locally damaged fire protection

The structural integrity of steel members is jeopardized when fire insulation is partially lost. This paper examined the thermal and mechanical properties of fire insulation under elevated temperatures to further understand thermal gradients and develop preventative safety measures. A thermal analyzer measured the thermal conductivity of the insulation material using the transient plane source (TPS) method. Results show that thermal conductivity increases with temperature because the spray-applied fire resistance materials ...

Author(s): ,

Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials (PCMs)

Phase change materials (PCMs) are an attractive solution for reducing energy usage because of their efficient latent heat storage abilities. This paper examined chemical and physical properties of micro-PCMs before and after their integration with concrete samples. A Thermal Constants Analyser (TPS) measured the thermal conductivity of the PCM-concrete using the transient plane source (TPS) method. Results showed that overall, the thermal conductivity of the concrete was unchanged after the ...

Author(s): , , , ,

Growth rate of crystallization in disodium hydrogenphosphate dodecahydrate

Phase change materials have supercooling characteristics that would benefit long-term latent heat thermal energy storage. This paper studied the physical and chemical properties associated with the growth rate of crystallization in disodium hydrogenphosphate dodecahydrate (DHD) as a function of a degree of supercooling. The transient plane source (TPS) technique was used to measure the thermal conductivity of the DHD samples. Results of the thermal conductivity test showed that the solid ...

Author(s): ,