Thermal Conductivity Paper Database

One-pot synthesis of light-driven polymeric composite phase change materials based on N-doped porous carbon for enhanced latent heat storage capacity and thermal conductivity

Polymeric composite materials were prepared by one-pot synthesis of chromophoric polymer phase change material in nitrogen-doped porous carbon (NPC). Thermal conductivity was found to increase with increasing NPC wt%, enhancing the heating rate with a shorter phase change period....

Author(s): Dimberu G. Atinafu, Ge Wang, Hongyi Gao, Jingjing Wang, Mu Yang, Wenjun Dong, Xiubing Huang

Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite

This article discussed the creation of phase change composite materials using molten binary salts and expanded graphite (EG). Three different salts were used, LiNO3–KCl, LiNO3–NaNO3 and LiNO3–NaCl. The amount of salt in the composites varied between 77.8% and 81.5%. The thermal conductivity of the products was assessed to determine how it was affected by the addition of expanded graphite. The researchers determined that they had increased the thermal conductivity ...

Author(s): Daili Feng, Ge Wang, Limin Zhong, Xiaowei Zhang, Yanhui Feng, Yi Luan

Thermal conductivity of nanoporous glass alumina film and composites

The thermal conductivity of nanoporous glass alumina films (NGAFs) were theoretically and experimentally studied in this paper. The thermal conductivity of pristine NGAFs and silver nanowire-infused NGAFs of various pore sizes and porosities were measured with a thermal constants analyser based on the transient plane source (TPS) method. Theoretical and experimental results were consistent with one another, and indicated that the pore radius and porosity of the films influenced thermal ...

Author(s): Congliang Huang, Ge Wang, Xinxin Zhang, Yanhui Feng