Three different carbons (carbon black, synthetic graphite particles and carbon fiber) were added to Vectra A950RX Liquid Crystal Polymer in order to synthesize different composites for use in fuel cells. The carbon fillers were used individually and also in combination with other carbon fillers. A TPS was used to measure the thermal conductivities of the synthesized composites. It was found that the use of synthetic graphite particles as the ...
Two different types of polyacrylonitrile carbon fibers (Fortafil 243 and Panex 30) were added to thermoplastic matrix (Vectra A950RX Liquid Crystal Polymer) in order to generate carbon fiber/liquid-crystal polymer composites. The in plane and through-plane thermal conductivities of these composites were then evaluated and compared to values generated from a theoretical model, with good agreement. Panex 30 gave higher in-plane thermal conductivity than Fortafil 243 for all volume fractions studied....
Yttria-stabilized zirconia (YSZ) was synthesized by the spark plasma sintering process to generate pore-free, homogenous bulk samples that were then tested for thermal conductivity, which was measured by two separate methods: TPS and LFT. The TPS method was found to be better for measuring of thermal conductivity in this specific case. Using the phonon-hopping model (PHM) the authors were able to determine how grain boundaries of the bulk samples affected ...
Various polyacrylonitrile carbon fillers (Ketjenblack carbon black, Thermocarb synthetic graphite, Fortafil 243 carbon fiber, and Panex 30 carbon fiber) were added to a thermoplastic matrix in the hopes of generating a thermally conductive resin that could be used as bipolar plates in fuel cells. These composites were then tested for through-plane thermal conductivity using the Nielsen model which was a function of the single filler volume fraction. The authors also developed a ...
Synthetic graphite particles were added to a liquid crystal polymer and then these composites were tested for through-plane and in-plane thermal conductivity using the TPS method. The authors expanded on an empirical model created to determine the relationship between thermal conductivity and volume percent of filler. This empirical model can now be used to approximate the in-plane thermal conductivities for a range of applications....
