In this article, the authors present a novel method for the synthesis of graphene layers that can be used in advanced electronic devices, among other applications. The preparation method involves the use of a high-pressure high-temperature process where the pressure and temperature are closely monitored in order to preferentially prepare graphene layers. The quality of the material synthesized is much better than previously reported, and the size of the layers ...
Nanocomposites were prepared by the mixing of multi-walled carbon nanotubes (MWCNTs) with nitrile and hydrogenated nitrile elastomers (NBR and HNBR). A variety of methods including TEM, SEM, and XRD were used in order to investigate the morphology of the nanocomposites. Many mechanical properties of the nanocomposites were measured and reported. A machine was used to measure the thermal properties of the synthesized nanocomposites....
Microencapsulated phase change materials (MPCMs) are excellent materials for the storage of thermal energy, and through their dispersal into a carrier fluid, microencapsulated phase change slurries (MPCS) can be prepared. These slurries exhibit both excellent thermal energy storage and heat transfer properties. A series of MPCS were prepared for this research and subsequently tested for thermal conductivity and specific heat. Other methods of quantification include DSC, TGA, rheometry, and infrared ...
The thermal properties of coated paper are investigated and how those properties affect the other properties of the coated paper. Using the TPS system the authors are able to measure the thermal conductivity of coated paper samples. It was found that increasing coating mass led to a higher thermal conductivity which in turn led to a decrease in toner gloss and density....
The main objective of this research project was to create a material with a very low thermal conductivity at high temperatures, for the conservation of energy in high temperature systems. To accomplish this goal, the researchers incorporated carbon nanofibers into the mesoporous network of monolithic aerogels, with up to a 20 wt.% through an accelerated-gelation sol-gel process. The synthesis process also involved the use of supercritical drying of the aerogels to ...
