Metal doping of a polypyrrole matrix was carried out. Nickel and Cobalt were the two metals that were used in this study, and three samples were prepared, one containing 100% Co, one containing 50% Co and 50% Ni, and finally, one containing 100% Ni. The effective thermal conductivity and thermal diffusivity were evaluated, and it was determined that metal doping of the polymer matrix resulted in increases in both the thermal conductivity, and the ...
Graphite nanoplatelets were dispersed in varying quantities into a silicone matrix to form composite materials with higher thermal conductivities than the pure silicone matrix without sacrificing mechanical properties. It was found that the thermal conductivities of the composites increased with increasing GNP content as well as with increasing GNP particle size. The composites were found to be effectively electrically insulating, and it was found that the addition of GNP did ...
Composite phase change materials were prepared using stearic acid, coffee grounds, and graphite. The coffee grounds were used as a supporting material for the stearic acid, and the graphite was added in an effort to enhance the thermal conductivity of the composite. The composites were characterized by SEM and FT-IR, the thermal conductivity was determined by the phase change temperature and latent heat were determined by differential scanning calorimetry. The ...
The goal of this work was to produce a new high performance PCM, using a combination of RT 100 (paraffinic hydrocarbons) with expanded graphite (EG). The resulting composite performed extremely well in quality testing. Thermal conductivity was measured using the TPS method, and was found to be much higher in the composite than it was in the basic RT 100 materials. Thermal conductivity did not decrease during melting cycles. The ability of ...
The reaction to fire properties of three commercial coatings designed for steel structures were investigated. The coatings in this study were covering a glass fiber-reinforced epoxy composite. It was determined that the thermal barrier effectiveness of these coatings was dependent on the degree of expansion and the thermal conductivity of the expanded char. Using these two parameters, the required thickness of a coating that can enable a structure to withstand ...
