Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: X-ray Diffraction

Total Papers Found: 60

Thermoelectric Properties of Ca3xDyxCo3.95Ga0.05O9+d

Thermal properties of Ca3xDyxCo3.95Ga0.05O9+d were quantified, as were the thermoelectric properties. X-ray diffraction was used to determine the phase of the samples. The thermopower of all samples was determined to be positive. The figure of merit and the power factor increased for the samples after doping had occurred....

Author(s): , ,

Thermal transport, thermomechanical, and dielectric properties of chalcogenide Se98–xAg2Inx (x = 0, 2, 4, 6) system

The influence of In content in the Se98-xAg­2Inx (x = 0, 2, 4, 6) system of chalcogenide glasses on the physical properties of the glasses were investigated by the authors. The maximum thermal conductivity and thermal diffusivity value was observed for the sample containing 2 at. % In. The microhardness was found to initially decrease upon doping of In for Se; however, it began to slowly increase after a certain In content had been attained. ...

Author(s): ,

High temperature thermoelectric properties of co-doped misfit-layered cobaltites

The thermoelectric properties of the co-doped misfit-layered cobaltites of Ca3-x­AgxCo3.95Fe­0.05O9+delta (x=0.0, 0.1, 0.2, 0.3) were investigated at temperatures between 300 and 700 K. It was found that the thermopower increased with increasing temperature. The thermal conductivity was found to increase with increasing Ag+ content in the samples, and the highest calculated figure of merit was determined for the Ca2.8Ag0.2Co3.95Fe0.05O9+delta....

Author(s): , ,

Study on effective thermal conductivity of zinc sulphide/poly(methyl methacrylate) nanocomposites

Zinc sulfide nanoparticles were embedded in a poly(methyl methacrylate) matrix to prepare a  nanocomposite polymer with a higher thermal conductivity than the pure polymer. It was determined by TEM that at a low concentration of filler particles, the particles are uniformly dispersed throughout the matrix; however, at higher concentrations, agglomeration of the filler particles occurs. The effective thermal conductivity for all samples was found to increase with increasing temperature ...

Author(s): , ,

Measurement of Thermal Transport Properties in Metal Doped Polypyrrole

Metal doping of a polypyrrole matrix was carried out. Nickel and Cobalt were the two metals that were used in this study, and three samples were prepared, one containing 100% Co, one containing 50% Co and 50% Ni, and finally, one containing 100% Ni. The effective thermal conductivity and thermal diffusivity were evaluated, and it was determined that metal doping of the polymer matrix resulted in increases in both the thermal conductivity, and the ...

Author(s): , , , , ,