Yttria-stabilized zirconia (YSZ) powders containing varying amounts of SiO2 and Al2O3 impurities were plasma sprayed onto metallic substrates and subsequently investigated. The authors were interested in how the impurities affected sintering rates, thermal conductivity, linear contraction, and pore size and architecture among other things. The YSZ coatings were heat treated at 1400°C for 10 hours and then analyzed for the properties mentioned above. A machine was used to measure the ...
CaMnO3 has been proposed for use in thermoelectric materials, due to its favourable thermoelectric properties. In this article, the effect of doping using bismuth and silicon to replace calcium and manganese respectively has been studied. Important properties of the doped compounds measured include thermopower, thermal conductivity, and electrical resistance. Different amounts of dopant are used, and it was determined that the compound Ca0.98Bi0.02Mn0.98Si0.02O3 has the highest ...
Sebacic acid (SA) can be absorbed into the pores of expanded graphite (EG) to form a SA/EG composite phase change material (PCM). There is no chemical interaction between the SA and EG, they are merely integrated. The optimal amount of SA was found to be 85 wt.% of the total mixture. The 85 wt.% composite had a phase change temperature of ~ 128°C, with a latent heat of ~ 187 J/g. The thermal ...
Using industrial grade mullite powder and a foaming and starch consolidation process, a series of porous mullite ceramics were prepared. These ceramics were analyzed by a thermal constants analyzer, and it was determined that the ceramics had low thermal conductivities and would make good thermal insulators. The porosity of the synthesized ceramics can be controlled by the sintering temperature and by adjusting solid loading. The ceramics were subjected to theoretical ...
Using a three-roll mill process, graphite nanoplatelets (GNPs) were dispersed in a silicone polymer for application as a thermal interface material. Through the use of electron microscopy and XRD, the researchers were able to determine that the GNPs dispersed better when using the three-roll milling process as compared to previously used methods. GNPs were mixed with the silicone polymer in wt.% up to 25, with the highest wt.% yielding the highest ...
