This paper discussed the creation of ceramic foams with various amounts of agar added. The foams used fly ash as the raw material in order to make them more environmentally friendly. The authors hoped that this successful use of fly ash could help to recycle ...
This article discusses the creation of a porous mullite ceramic through the incorporation of fly ash cenospheres (FAC) into mullite powder through the gelcasting process. Sintering temperature and the amount of FAC added were investigated as factors affecting density and strength. The authors found that ...
Coal fly ash was used as the base material for the formation of thermal insulation materials. The porosity of the produced materials ranged from 86.3-94.5 vol. %. The insulating materials were prepared by ball milling, followed by foaming assisted by the addition of K12, casting and ...
Porous materials have widespread industrial applications. In this study, mullite materials with porosities between 72-86 vol% were fabricated and a thermal analyzer (TPS) measured their thermal conductivity using the transient plane source (TPS) technique. Results showed that as the porosity of the mullite materials decreased, ...
Using industrial grade mullite powder and a foaming and starch consolidation process, a series of porous mullite ceramics were prepared. These ceramics were analyzed by a thermal constants analyzer, and it was determined that the ceramics had low thermal conductivities and would make good thermal ...
