Nanocomposites were prepared by the mixing of multi-walled carbon nanotubes (MWCNTs) with nitrile and hydrogenated nitrile elastomers (NBR and HNBR). A variety of methods including TEM, SEM, and XRD were used in order to investigate the morphology of the nanocomposites. Many mechanical properties of the nanocomposites were measured and reported. A machine was used to measure the thermal properties of the synthesized nanocomposites....
A series of compacted Bi0.5Sb1.5Te3 nanoplatelets are synthesized using hydrothermal methods, followed by cold pressing and sintering at temperatures between 300°C and 380°C. A variety of thermal, mechanical and electrical analyses are then performed on the synthesized nanoplatelets including: TPS technique for thermal conductivity, SEM/TEM/AFM to elucidate the mechanical and physical properties of the nanoplatelets, and the Oxford closed cycle cooler cryostat for measurement of electrical ...
The addition of graphene nanoplatelets (GNP) to a paraffin-based solvent, eicosane was performed at various wt.% and subsequently the synthesized GNP/eicosane composites were analyzed by a variety of machines. The characterization of the GNP/eicosane composites was performed by the TPS technique for the measurement of thermal conductivity from 10°C to 35°C. At a wt.% of 10 GNP filler the composite had a thermal conductivity four times that of unfilled ...
The present study look at the creation of unfilled and carbon nanofibre (CNF)-filled polypropylene (PP) foams, and their subsequent testing of thermal and mechanical properties. The testing of thermal properties was accomplished by the TPS Technique and determined that when using up to 20 wt.% CNF as filler there was no increase in thermal conductivity of any of the sample foams. Therefore it was decided that it was the foamed ...
Thermally Exfoliated Graphite Oxide (TEGO) was mixed with natural rubber (NR) using a two-roll mill but the mixing of the TEGO with the NR didn't proceed as expected. Therefore the researchers had to modify the procedure and decided to pre-mix the TEGO and NR in an ultrasonically-assisted latex co-coagulation process followed by two-roll milling resulted in significant improvement in the thermal and electrical properties of the nanocomposite compared to the ...
