The researchers propose an improvement in the theory of the transient plane source (TPS) technique. They claim that Gustafsson has ignored the contribution of the electrical resistance charge of the nickel double spiral and the heat capacity of the polyimide film surrounding the nickel spiral. The researchers developed improved mathematical equations to supposedly improve the accuracy of the technique by 1.8 to 2.3%....
Using the transient plane source (TPS) technique, the effect of addition of pine tree particles to styrene butadiene rubber is studied. Thermal conductivity, thermal diffusivity, specific heat capacity and density were all investigated. Varying amounts of the pine tree filler particles were added to the polymer matrix in order to form composites. Increasing amounts of the pine tree filler resulted in higher thermal conductivity and thermal diffusivity, with decreasing specific ...
The authors set out to prepare cellular vitreous carbon (CVC) foams with varying thermal and physical properties. This was accomplished by using tannin-based resin modified by different isocyanates in varying amounts. Three different experimental procedures were used to prepare foams with different physical and thermal properties. Physical properties of the foams studied include density, as well as pore volume, pore size and cell diameter. The transient plane source (TPS) technique ...
Two series of nanofluids were prepared by the researchers, using water as the carrier fluid, and Al2O3 and TiO2 as the nanoparticles; up to 6% particle volume fraction was used. The thermal conductivity and thermal diffusivity of the nanofluids were measured using the transient plane source (TPS) technique, and dynamic viscosity was also measured. The amount of nanoparticle volume fraction affected the value of thermal conductivity, but the nanoparticle cluster ...
An investigation was undertaken to try to gain insight into altered thermal properties of the seafloor near Japan caused by the earthquake and subsequent tsunami that devastated Japan and caused the meltdown of the nuclear reactor in Fukushima in 2011. Core samples of rock were drilled by the JFAST project and these samples were analyzed using the transient plane source (TPS) technique to determine thermal conductivity, thermal diffusivity and volumetric heat ...
